Side-stream lignins: Potential antioxidant and antimicrobial agents in milk.

In recent years, lignin has drawn increasing attention due to its intrinsic antibacterial and antioxidant activities, biodegradability, and biocompatibility. Yet, like several other biogenic structures, its compositional heterogeneity represents a challenge to overcome. In addition, there are few studies regarding food applications of lignin. Herein, we evaluate the antimicrobial and antioxidant effects of lignin from two different sources. These lignins were characterized by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) and hydrogen nuclear magnetic resonance (1H NMR) spectroscopies. Their antibacterial and antioxidant capacities (DPPH and Folin-Ciocalteu methods) were also investigated. Susceptibility tests were performed with the minimal inhibitory (MIC) and bactericidal (MBC) concentrations using the micro-broth dilution technique. Kraft lignin presented higher radical-scavenging and antibacterial activities than alkali lignin, indicating the dependence of antioxidant and antibacterial activities on the precursor biomass. Scanning electron microscopy shows morphologic changes in the bacteria after exposure to lignin, while confocal microscopy suggests that kraft lignin has affinity towards bacterial surfaces and the ability to cause cell membrane destabilization. Lignin inhibited the growth of Staphylococcus aureus and Salmonella Enteritidis in skimmed milk, herein taken as food model. Our results suggest that lignins are promising candidates for green additives to improve quality and safety within the food chain.

Effects of Mangosteen Peel Phenolic Compounds on Tilapia Skin Collagen-Based Mineralized Scaffold Properties.

A proper valorization of biological waste sources for an effective conversion into composites for tissue engineering is discussed in this study. Hence, the collagen and the phenolic compound applied in this investigation were extracted from waste sources, respectively, fish industry rejects and the peels of the mangosteen fruit. Porous scaffolds were prepared by combining both components at different compositions and mineralized at different temperatures to evaluate the modifications in the biomimetic formation of apatite. The inclusion of mangosteen extract showed the advantage of increasing the collagen denaturation temperature, improving the stability of its triple helix. Moreover, the extract provided antioxidant activity due to its phenolic composition, as confirmed by 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidant assays. Mineralization was successfully achieved as indicated by thermogravimetry and scanning electron microscopy. A higher temperature and a lower extract concentration reduced the calcium phosphate deposits. The extract also affected the pore size, particularly at a lower concentration. The X-ray diffraction pattern identified a low degree of crystallization. A high mineralization temperature induced the formation of smaller crystallites ranging from 18.9 to 25.4 nm. Although the deposited hydroxyapatite showed low crystallinity, the scaffolds are suitable for bone tissue applications and may be effective in controlling the resorbability rate in tissue regeneration.

Influence of blend ratio and mangosteen extract in chitosan/collagen gels and scaffolds: Rheological and release studies.

This study proposes the incorporation of mangosteen peel extract in chitosan and collagen gels and scaffolds, at different ratios, for fabricating materials with potential wound dressing applications. The extract addition increases the thermal stability of the collagen while decreasing to about one-fifth the swelling capability of its scaffolds. Oppositely, it enables chitosan and its blends to withstand high swelling percentages. Release studies showed an extract delivery of 30%, indicating that the formulation does not affect this property. Additionally, the models of Weibull and the Korsmeyer-Peppas adequately fitted the release curves, in which the last one suggested a faster release regarding extract concentration. In contrast, rheology profiling demonstrated distinct behavior associated with the formulations. Even though all the samples exhibit a shear-thinning characteristic, changes in the blend ratio increased the extension of the Newtonian plateau range. The applied Cross mathematical model showed an increase in interactions between the components.

Mineralization of Phosphorylated Fish Skin Collagen/Mangosteen Scaffolds as Potential Materials for Bone Tissue Regeneration.

In this study, a potential hard tissue substitute was mimicked using collagen/mangosteen porous scaffolds. Collagen was extracted from Tilapia fish skin and mangosteen from the waste peel of the respective fruit. Sodium trimetaphosphate was used for the phosphorylation of these scaffolds to improve the nucleation sites for the mineralization process. Phosphate groups were incorporated in the collagen structure as confirmed by their attenuated total reflection Fourier transform infrared (ATR-FTIR) bands. The phosphorylation and mangosteen addition increased the thermal stability of the collagen triple helix structure, as demonstrated by differential scanning calorimetry (DSC) and thermogravimetry (TGA) characterizations. Mineralization was successfully achieved, and the presence of calcium phosphate was visualized by scanning electron microscopy (SEM). Nevertheless, the porous structure was maintained, which is an essential characteristic for the desired application. The deposited mineral was amorphous calcium phosphate, as confirmed by energy dispersive X-ray spectroscopy (EDX) results.

Combination of Rhamnolipid and Chitosan in Nanoparticles Boosts Their Antimicrobial Efficacy.

Nanomaterials have emerged as antimicrobial agents due to their unique physical and chemical properties. The development of nanoparticles (NPs) composed of natural biopolymers and biosurfactants have sparked interest, as they can be obtained without the use of complex chemical synthesis and toxic materials. In this study, we develop antimicrobial nanoparticles combining the biopolymer chitosan with the biosurfactant rhamnolipid. Addition of rhamnolipid reduced the size and polydispersity index of chitosan nanoparticles showing a more positive surface charge with improved stability, suggesting that chitosan-free amino groups are predominantly present on the surface of nanoparticles. Antimicrobial activity of chitosan/rhamnolipid nanoparticles (C/RL-NPs) against Staphylococcus strains surpassed that of either single rhamnolipid or chitosan, both in planktonic bacteria and biofilms. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of C/RL-NPs were determined considering the concentration of each individual molecule in NPs. MIC values of 14/19 µg mL-1 and MBC of 29/37 µg mL-1 were observed for S. aureus DSM 1104 and MIC and MBC of 29/37 and 58/75 µg mL-1 were observed against S. aureus ATCC 29213, respectively. For S. epidermidis, MIC and MBC of 7/9 and 14/19 µg mL-1 were noticed. Chitosan and chitosan nanoparticles eliminate the bacteria present in the upper parts of biofilms, while C/RL-NPs were more effective, eradicating most sessile bacteria and reducing the number of viable cells below the detection limit, when NPs concentration of 58/75 µg mL-1 was applied for both S. aureus DSM 1104 and S. epidermidis biofilms. The improved antibacterial efficacy of C/RL-NPs was linked to the increased local delivery of chitosan and rhamnolipid at the cell surface and, consequently, to their targets in Gram-positive bacteria. The combination of chitosan and rhamnolipid offers a promising strategy to the design of novel nanoparticles with low cytotoxicity, which can be exploited in pharmaceutical and food industries.

Rheological and antioxidant properties of chitosan/gelatin-based materials functionalized by pomegranate peel extract.

Biopolymer-based materials are potential candidates for food coatings application. In this study, pomegranate (Punica granatum L.) peel extract (PPE) at different concentrations was incorporated to chitosan/gelatin gels and the rheological, antioxidant and structural properties were evaluated. Due to its high phenolic content, PPE enhanced the antioxidant capacity of chitosan/gelatin mixtures. PPE addition extended linear viscoelastic range and enabled the samples to easily flow under the applied shear rate. Rheological properties indicated that both viscosity and activation energy of materials containing natural compounds are highly dependent on temperature. Scanning electron microscopy (SEM) images revealed the influence of PPE concentration in the scaffolds pores size. Findings of this study proved that PPE was capable to improve the functional characteristics of chitosan/gelatin-based materials enhancing the desired properties for their potential application as food coatings.

Avaliação histológica e histomorfométrica da regeneração óssea a partir da utilização de biomateriais em tíbias de ovinos / Histological and histomorphometric evaluation of bone regeneration with biomaterial in the tibia of sheep

Falhas ósseas são comumente encontradas na medicina veterinária em diferentes enfermidades, principalmente por traumas em grandes animais. Frequentemente faz-se necessário auxiliar este reparo tecidual para melhor correção desta falha. Os biomateriais foram desenvolvidos para cumprir esta função. A fim de avaliar o comportamento celular perante estes substitutos ósseos, a realização de testes in vivo é fundamental. A partir da observação da unidade morfofuncional do tecido é possível avaliar a quantidade e a qualidade do tecido neoformado. Atualmente, em estudos ortopédicos, os ovinos são considerados animais de escolha como modelo experimental. Falhas ósseas foram realizadas experimentalmente em ovinos, onde foram implantados biomateriais à base de quitosana, hidroxiapatita e colágeno. Após 60 dias foi realizada biopsia no local do reparo tecidual e por meio da histomorfometria da matriz orgânica, da análise descritiva da microscopia de luz e da microscopia eletrônica de transmissão, o tecido neoformado foi avaliado e comparado. Na histomorfometria, não houve diferença significativa quanto à quantidade de tecido neorformado do grupo controle e do grupo com biomaterial, porém quando comparado ao osso pré-existente, retirado no momento da confecção da falha, a área de matriz óssea foi menor. Na descrição da microscopia de luz e em maiores detalhes na análise ultra estrutural, observou-se o biomaterial em contato íntimo com o tecido neoformado, sugerindo boa biocompatibilidade. Foi possível observar o padrão da reparação tecidual, onde o membro controle e o membro com biomaterial não diferiram quanto à arquitetura tecidual, porém nas amostras com o implante do biomaterial foi identificada a presença do mesmo. Todas estas informações sugerem que o biomaterial não prejudicou a regeneração óssea, apresentou boa biocompatibilidade e denota potencial para auxiliar na rotina ortopédica de grandes animais.(AU)

Bone defects are commonly found in veterinary medicine through different disease such as trauma, especially in large animals. Frequently it is necessary to assist this tissue repair for better regeneration. Biomaterials in general are designed to this function. In order to understand the bone cells in the presence of bone substitutes, tests in vivo are essential for these studies. The quantity and quality of new tissue formation can be assessed by observation of tissue morphofunctional unit. Currently, in orthopedic studies sheep are considerated animals of choice for experimental development. Bone defects were performed experimentally in sheep and were implanted chitosan, hydroxyapatite and collagen biomaterials. After 60 days, biopsy was performed at the site of tissue repair and the new tissue formation was described, evaluated and compared by organic matrix bone histomorphometry and electronic transmission microscopy. After hystomorfometry analysis there was no difference between control group and biomaterial group, but when compare with pre-existent tissue, the values are smaller. In descriptive analysis was observed intimate contact with biomaterial and new tissue formation suggesting biocompatibility. It observed the pattern of tissue repair in control group and biomaterial group did not differ in the architecture tissue. However, in the biomaterial group was identified presence of the biomaterial in the specimen. All these data suggest that the biomaterial did not impair bone regeneration, had good biocompatibility and potential to assistant in orthopedic routine of large animals.(AU)

Effect of Human Adipose Tissue Mesenchymal Stem Cells on the Regeneration of Ovine Articular Cartilage.

Cell therapy is a promising approach to improve cartilage healing. Adipose tissue is an abundant and readily accessible cell source. Previous studies have demonstrated good cartilage repair results with adipose tissue mesenchymal stem cells in small animal experiments. This study aimed to examine these cells in a large animal model. Thirty knees of adult sheep were randomly allocated to three treatment groups: CELLS (scaffold seeded with human adipose tissue mesenchymal stem cells), SCAFFOLD (scaffold without cells), or EMPTY (untreated lesions). A partial thickness defect was created in the medial femoral condyle. After six months, the knees were examined according to an adaptation of the International Cartilage Repair Society (ICRS 1) score, in addition to a new Partial Thickness Model scale and the ICRS macroscopic score. All of the animals completed the follow-up period. The CELLS group presented with the highest ICRS 1 score (8.3 ± 3.1), followed by the SCAFFOLD group (5.6 ± 2.2) and the EMPTY group (5.2 ± 2.4) (p = 0.033). Other scores were not significantly different. These results suggest that human adipose tissue mesenchymal stem cells promoted satisfactory cartilage repair in the ovine model.

Influence of collagen addition on the thermal and morphological properties of chitosan/xanthan hydrogels.

This study investigates the collagen influence on thermal and morphological characteristics of chitosan/xanthan hydrogels for potential tissue engineering applications. Anionic collagen was prepared by selective hydrolysis of type I collagen found in bovine tendons. Chitosan was obtained from the partial deacetylation of squid pen ß-chitin and xanthan was acquired from Fluka. The hydrogels were obtained in different ratios and were characterized by thermal and morphological analysis. FT-IR suggested only electrostatic interactions between NH3(+) groups of chitosan and COO(-) groups of xanthan and collagen. Thermogravimetric curves showed that hydrogels contain a great amount of water (above 98%) and the presence of collagen does not change this characteristic. Freezing-bound water transition in DSC curves was shifted to higher values due to the increase of water/polymer interaction, mainly when different ratios of chitosan and xanthan were used. SEM images showed sheet-form structures with the presence of collagen promoting an increase in pore size.

Production and in vitro characterization of 3D porous scaffolds made of magnesium carbonate apatite (MCA)/anionic collagen using a biomimetic approach.

3D porous scaffolds are relevant biomaterials to bone engineering as they can be used as templates to tissue reconstruction. The aim of the present study was to produce and characterize in vitro 3D magnesium-carbonate apatite/collagen (MCA/col) scaffolds. They were prepared by using biomimetic approach, followed by cross-linking with 0.25% glutaraldehyde solution (GA) and liofilization. Results obtained with Fourier-transform infrared spectroscopy (FT-IR) confirmed the type-B carbonate substitution, while by X-ray diffraction (XRD), a crystallite size of ~10nm was obtained. Optical and electron microscopy showed that the cylindrical samples exhibited an open-porous morphology, with apatite nanocrystals precipitated on collagen fibrils. The cross-linked 3D scaffolds showed integrity when immersed in culture medium up to 14 days. Also, the immersion of such samples into an acid buffer solution, to mimic the osteoclastic resorption environment, promotes the release of important ions for bone repair, such as calcium, phosphorus and magnesium. Bone cells (SaOs2) adhered, and proliferated on the 3D composite scaffolds, showing that synthesis and the cross-linking processes did not induce cytotoxicity.

Injectable gels of anionic collagen:rhamsan composites for plastic correction: preparation, characterization, and rheological properties.

The present article describes the preparation and characterization of anionic collagen gels obtained from porcine intestinal submucosa after 72 h of alkaline treatment and in the form of rhamsan composites to develop injectable biomaterials for plastic reconstruction. All materials were characterized by SDS/polyacrylamide gel electrophoresis, infrared spectroscopy, thermal stability, potentiometric titration, rheological properties, and fluidity tests. Biocompatibility was appraised after the injection of anionic collagen: rhamsan composites at 2.5% in 60 North Folk rabbits. Independently of processing, the collagen's secondary structure was preserved in all cases, and after 72 h of hydrolysis the collagen was characterized by a carboxyl group content of 346+/-9, which, at physiological pH, corresponds to an increase of 106+/-17 negative charges, in comparison to native collagen, due to the selective hydrolysis of asparagine and glutamine carboxyamide side chain. Rheological studies of composites at pH 7.4 in concentrations of 2, 4, and 6% (in proportions of 75:1 and 50:1) showed a viscoelastic behavior dependent on the frequency, which is independent of concentration and proportion. In both, the concentration of the storage modulus always predominated over the loss modulus (G'>G'' and delta<45 degrees ). The results from creep experiments confirmed this behavior and showed that anionic collagen:rhamsan composites at pH 7.4 in the proportion of 50:1 are less elastic and more susceptible to deformation in comparison to gels in the proportion of 75:1, independent of concentration. This was further confirmed by flow experiments, indicating that the necessary force for the extrusion of anionic collagen:rhamsan composites, in comparison to anionic collagen, was significantly smaller and with a smooth flow. Biocompatibility studies showed that the tissue reaction of anionic collagen:rhamsan composites at 2.5% in the proportion of 75:1 was compatible with the application of these gels in plastic reconstruction. These results suggest that the association of collagen with rhamsan may be a good alternative in the replacement of glutaraldehyde to stabilize the microfibril assembly of commercial collagen gel preparations.

Membranas de colágeno como suporte de liberaçäo controlada de antibióticos / Collagen membranes as support the controlled release of antibiotics

Este trabalho estudou a liberação controlada dos antibióticos rolitetraciclina e ciprofloxacina suportados em membranas de colágeno. No caso de membranas com ciprofloxacina, ocorreu liberação total em 10 min, enquanto que a liberação da rolitetraciclina ocorreu durante um período de 90 min, com valores de k e n de respectivamente 0,10 e 0,48, por meio de um processo de difusão comum. Estes resultados sugerem que a rolitetraciclina suportada pode ser utilizada em periodontia e em implantes dentários.

Abstract: This work studied the controlled release of rolitetracycline and ciprofloxacine supported by collagen membranes. While ciprofloxacine was totally released within a time interval of 1 O min, rolitetracycline was released to only 73% after 90 min, with values for k and n of respectively O, 1 O and 0,48, suggesting a normal diffusion release mechanism. These results suggest that supported rolitetracyclines may be useful with periodontal and dental implant surgery